Houston Radar › Support Forum › Product Support FAQ › Armadillo Tracker Speed and Volume Collector Support › 4 lane road collection

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Vipin Malik
    Keymaster
    October 28, 2020 at 3:24 pm
    Post count: 57
    #2200

    When a center collection point is not available on a 4 lane, two direction road and the radar is placed on the side of the road, is data collected from the 2 lanes closest to the radar or will it collect data from the center or even outgoing lanes furthest from the radar?

    Vipin Malik
    Keymaster
    October 28, 2020 at 3:24 pm
    Post count: 57
    #2201

    The Armadillo Tracker collects data by direction. So any target within “range” will get counted and stored by direction.

    So the outgoing direction will not get merged with the incoming direction. However, some vehicles from the outgoing direction will be logged as they will not all be out of range (from our tests, the outgoing- lane 3 & 4 accuracy will be around 60 to 70%- which is not within our spec). However we would recommend deleting these outgoing vehicles once data is imported into a project. You can delete all data by direction in the project and use the incoming (lane 1 & 2) data.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.