Houston Radar › Support Forum › Product Support FAQ › SpeedLane Multi-Lane Detector Support › Does SpeedLane support direct Ethernet Connection to PC?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Vipin Malik
    Keymaster
    August 5, 2019 at 5:35 pm
    Post count: 57
    #336

    Yes. If your SpeedLane Pro features the Ethernet option, you may plug the RJ45 connector directly into the Windows PC Ethernet RJ45 connector to connect via Ethernet.

    Follow the steps below:

    1. Ensure you have the latest version of the Houston Radar Stats Analyzer Pro software installed on your Windows PC (sorry, Mac is not supported).
    2. Power up the SpeedLane Pro. Wait about 45 seconds for the unit to boot up and auto configure an IP address.
    3. Plug in the RJ45 connector at the end of the SpeedLane Pro cable to the RJ45 connector on the PC. Ensure Link light comes on. Activity light may not flash.
    4. Launch the Houston Radar Stats Analyzer pro by clicking on the shortcut on your desktop (look for our company ‘swirl’ icon on your desktop)
    5. Click on “Connect to Radar” button. Wait for the window to pop up.
    6. Pull down the “Connect to Radar On…” pull down menu. You should have a “Localnetwork:<speedlane unique name here>” entry.
    7. Click on connect to radar. You will get a “Radar Found” message. Click ok on the two pop-up boxes. You are connected.
    Vipin Malik
    Keymaster
    September 29, 2020 at 9:28 am
    Post count: 57
    #335

    Can I plug the SpeedLane Pro Ethernet connector (RJ45) directly into my Windows PC Ethernet jack to connect to the radar and configure it?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.