PNL10 kit is an ultra-low power speed measurement and display building block. Our state of the art SS400 Doppler radar integrated with a two-digit 7-segment display makes it ideal for use in small, thin and light radar signs for school zones, residential roads, homeowners associations, business parks, private roads, large parking lots and other similar installations. With an addition of a power source and enclosure, this kit can be quickly brought to market as a complete product.
- Zero cables highly integrated design assembles in minutes
- 10.5″ digit height with 30% inter-character separation is matched to 300 ft (90m) detection range of the radar for optimal display legibility even in bright sunlight
- Best in class power efficiency achieved by:
- Low power SS400 radar drives display eliminating extra CPU
- In-built ambient light sensing and automatic brightness control
- Ambient temperature compensation of LED drive voltage
- High efficiency boost regulator for LED drive voltage
- With no traffic present, radar automatically powers down the display further reducing power consumption to only 0.1W
- Wide input supply voltage operation allows flexible power supply options ranging from 3, 4 or 5 cell Lithium Ion packs to 6 or 12V Lead Acid batteries without sacrificing sign efficiency
- Built-in rotary switch allows user to set cutoff and violator speed alerts in the field without connecting to a computer
- White LED strobe and display flashing can be optionally activated to draw attention to speeding
- Easily expandable to a third digit via 5-pin connector
- Easily trigger your external LED “SLOW DOWN” or other custom message above preset speed
- Radar is FCC approved with CE mark and available in 24.125GHz and 24.200GHz versions for worldwide deployment
- Best in class “Advanced In-Radar” traffic statistics option available
- Complete reference design, evaluation and demo system with state of the art LiFePO4 batteries available to test 2″ deep sign
Title | Description | Download |
---|---|---|
PNL10-SS400-Short-Form-Data-Sheet | DownloadPreview | |
PNL10 User Manual | PNL10UserManual-Rev8 | DownloadPreview |
PNL10-Slow-Down-Bluetooth-wThumbwheel-Quick-Start | DownloadPreview | |
Android App - Download from Google Play Store | Download from Google Play Store | Download |
Houston Radar Stats Analyzer Installer | Download |
Dimensions11”x16”x1.1” (28 x 41 x 2.8 cm)
VCC | 5.5VDC to 15VDC (18V max) |
Icc@12VDC (Radar always on) | Display blank: 9.5 mA Display at night: 21 mA |
Radar RF out | 5 mW maximum |
Radar Fcenter | 24.125GHz or 24.200 GHz |
Operating °F (°C) | -40 (-40) min to 185 (85) max |
Pickup Distance | 400+ feet (120+ m) in most cases |
Beam Angle | 38°x45° |
Beam Polarization | Linear |
FCC ID (Radar) | UXS-IPS154US |
CE Mark (Radar) | Yes |
Weight | 1 lb (450g) approximately |
Display Brightness | 11,000 nits (cdm) maximum |
Part # | Image | Accessory | Description |
DGT1 | DGT1* | Expandable 1 Digit to PNL10 | |
Stat/Alc | Advanced In-Radar Statistics for Data Logging | ||
110-0130 | PNL10 Power Cable | 2 Foot PNL10 Power Cable. Molex to Bare Wires | |
SLOW DOWN Board | SLOW DOWN Board | Triggered by the PNL10 | |
USB-RS-P1 | USB Power Dongle | USB power supply and PC COM port serial interface for Houston Radar sensors. | |
BT-RS-P2-E-DTE | External Antenna Bluetooth | Class 1 long range Bluetooth module with male DB9 and external antenna in DTE configuration | |
BT-RS-P2-C-DTE | Chip Antenna Bluetooth | Class 1 long range Bluetooth module with male DB9 and chip antenna in DTE configuration | |
120-0010 | Tuning Fork | 3310Hz 46MPH Radar frequency check tuning fork |